I need this board layed out in Eagle CAD. It has one 64 pin LFP chip (MCF51JM128) and a few connectors and other parts. See attached schematic for basic information. The name of this board is FIREDUINO, not firebird. It is based on firebird, but is to an open sourced version. Please feel free to rename anything. Please fell free to move th component placement as required. Please also feel free to put your name on the work as the designer. It will have a GPL License. PLEASE NOTE: This board must pass DRC at batchpcb.com, and must be 2 layer only. If I select you for the job I will send you a batchpcb login and we will use this. I expect all Eagle files generated to be given to me. Prototype boards will be build by batchpcb. I will do the check out of the boards, but feel free to have some made for yourself if you wish. Please read http://batchpcb.com/index.php/Faq There are layout rules that must be followed. This is a ardunio "shield compatible" board, so some of the connectors must be placed exactly as shown. Note that there are more connections than a normal shield has. The connectors IOL,AD,IOH and POWER must be place exactly to the "shield" specification. You can get an example from "freeduino.org" but note that there are many differences, in that this board provides more connections. - The component RGB can be removed. - The entire circuit consisting of R11-R14, Q1-Q3 should be replace with a 3 pin 100 mil jumper that selects power source from either the DC connector (pin 3 of U1) or the USB connector (pin 1).